How do I set the weekly timer for my Dolphin?
You can use the weekly timer either directly from the power supply or on the application, depending on the model of your Dolphin.
Weekly timer on the power supply:
- LED light 1 - the robot is set to automatically perform one complete cycle per day. It will therefore start up 7 times during the scheduled week.
- LED light 2 - the robot is set to automatically perform a complete cycle once every two days. It will therefore start 4 times during the scheduled week.
- LED light 3 - the robot is set to automatically perform a cycle once every three days. If none of the buttons are pressed for the first 5 seconds after powering up, the robot will cycle once and only once.
As long as the robot is running in weekly programming mode, the LED indicator will flash continuously between cycles. At the end of the week, the power supply will turn off automatically. You must then reprogram the robot.
You must leave the power supply unit switched on when using the Dolphin robot weekly timer
The flashing light on the power supply indicates that the weekly programmer is activated on your Dolphin robot.
Although you may be away, the robot can stay in the water of your pool for a week, you will need to clean the filter at the end of the weekly cycle.
If you want to know more, we advise you to refer to the user manual of your Dolphin, you will need to indicate the model of your robot.