My impeller is clogged – How do I clean it?
These instructions are relevant for all robot models.
How to Clean the Impeller:
- Make sure the power supply is unplugged from the outlet.
- If you notice debris trapped in the impeller, open the impeller, remove the debris, and reassemble it. Use a Phillips-head screwdriver, do not use a power drill.
- If your robot model has grilles on the sides check for visible debris there as well.
You can also find instructions on how to clean the impeller of your model on our online manual website.
Depending on your Dolphin model, click on one of the short videos below that show how to clean the impeller of your Dolphin robot.
S50 (Cayman, T15, T25, Active 10, Escape, Encore, E20, E25)
S100 (Advantage, Proteus DX3, Saturn, Echo, Nautilus CC, Active 15, Escape)
S200 (E30, Advantage Ultra, Active 20, Quantum, T30, Proteus DX4)
S300 (E35/E35i, Proteus DX5i, Active 30, T35/T45, Premium 40, Explorer E30, E40i, Active 30i, T55i)
S400 (E50i, Active 50, Explorer E50)
M600 (Active 60, E60i, Premium 60)
M700 (Explorer E70)
Nautilus CC Plus (DX3)
M400 (Sigma/Nautilus CC Supreme)
If you need any further assistance, please contact us here.