Getting started with your Liberty 600
Congratulations on your new Liberty 600 and welcome to the Dolphin family! Getting started is easy. Follow these simple steps:
- Connect the charger to the robot.
- Plug the charger into an electrical outlet.
- Charge it until all 3 bars are solid green. Make sure the robot is fully charged before getting started!
- Once it's finished charging, unplug the charger from the electrical outlet and remove the charger from the robot.
- Press the power button, and let's connect to the MaytronicsOne app.
- Gently place it in the pool. Within 30 seconds, it will start working!
The robot does not stay connected to Wi-Fi + Bluetooth while operating in the water.
Ensure the cycle starts in at least 3 feet of water so the robot can reach and clean areas of the pool effectively.
That’s it! Sit back, relax, and enjoy your sparkling clean pool.