FAQ

Here are the steps to clean the filter on the Sonar 30:

1. Remove the robot from the pool. Place the robot on a flat, dry surface.

2. Make sure the robot is turned OFF.

3. Remove the filter lid and remove the filter basket.

4. Remove the filter lid by pressing the clips on the sides.

5. Rinse the lid and the filter with a garden hose on the highest stream.

It takes 2.5-3 hours for the Niya Sonar 30 to charge fully. The cleaning cycle times are 2-2.5 hours.

Solid Display

Solid Blue – Device is working
Red – Low Battery (2024) / Device Malfunction (2025)
Solid Green – Fully charged
Solid Yellow – Malfunction (2024)
Solid Purple – Device is stuck

Flashing Display

Flashing Blue Every 1 Sec: Device starting
Flashing Blue Every 3 Sec: Device is idle
Flashing Green – Device charging
Flashing Yellow – Low Battery (2025)
Flashing White – Firmware update